Thursday, November 26, 2009
Changing RF output channel on a Panasonic HDD recorder
An email enquiry to Panasonic elicited a reply in something under six months, and it only took another 15 minutes' experimentation to work out which bit of theie eventual instructions they had got wrong.
Here is what you REALLY need to do - at least for my DMREH50 (but I suspect it will be the same for many other models).
Choose the Functions menu, then hold down the Functions key on the remote for at least SIX seconds. You should see a rather crude screen that shows the current RF output channel, and allows you to choose a different one.
Simple once you know how.
Hope this is of use to someone.
Here is what you REALLY need to do - at least for my DMREH50 (but I suspect it will be the same for many other models).
Choose the Functions menu, then hold down the Functions key on the remote for at least SIX seconds. You should see a rather crude screen that shows the current RF output channel, and allows you to choose a different one.
Simple once you know how.
Hope this is of use to someone.
# posted by John Geddes @ 9:12 am 
